Product Description

PASS QUEST SRAM AXS 8-Bolt Direct Mount Narrow-Wide Chainring

The PASS QUEST SRAM AXS 8-Bolt Direct Mount Chainring is designed for compatible SRAM 8-bolt direct-mount cranksets, combining a full-profile design, secure narrow-wide chain retention and precision CNC construction for performance-focused road and gravel builds.

CNC-machined from high-strength 7075-T651 aluminum alloy, the chainring features a 3mm offset and an extended 8.5mm narrow-wide tooth profile designed to keep the chain securely engaged under hard acceleration, rough roads and gravel riding.

Available from 40T to 54T.

Important Compatibility

✓ SRAM 8-Bolt Direct Mount
✓ SRAM AXS 12-Speed Chain
✓ 3mm Offset
✕ NOT compatible with SRAM 3-Bolt Direct Mount cranks

Please confirm your crank mounting interface before ordering.

Designed for SRAM 8-Bolt Direct Mount Cranks

This chainring uses the SRAM 8-bolt direct-mount interface for a clean, integrated drivetrain setup.

Unlike traditional BCD chainrings, the direct-mount design attaches directly to the compatible crank interface.

This provides:

• Clean integrated appearance
• Secure crank-to-chainring connection
• Precise positioning
• Simplified drivetrain setup
• Reduced unnecessary hardware

Please note: SRAM 8-bolt and SRAM 3-bolt direct-mount interfaces are different and are not interchangeable.

3mm Offset

The chainring features a:

3mm Offset

The offset positions the chainring relative to the crank and drivetrain.

Before ordering, please confirm that 3mm offset is suitable for your crankset, frame and required chainline.

Extended Narrow-Wide Tooth Profile

PASS QUEST uses an extended narrow-wide tooth design with a tooth height of approximately:

8.5mm

The taller tooth profile provides deeper engagement with the chain, helping the chain remain securely seated even when the drivetrain experiences significant movement.

The narrow-wide profile is designed to closely engage alternating chain links for improved chain retention.

This is especially useful during:

• Gravel riding
• Rough road conditions
• Hard acceleration
• Sprinting
• High-cadence riding
• Road vibration

Made for SRAM AXS 12-Speed Chains

This version is specifically designed for:

SRAM AXS 12-Speed Chains

For the best drivetrain performance, use the chainring with the specified compatible chain.

This model is not listed for standard 10/11-speed chains.

Full-Profile Design

The full-profile chainring provides a clean, premium appearance while maintaining structural rigidity.

Rear-side CNC machining removes material from selected areas to reduce unnecessary weight while retaining support where it matters.

This design balances:

Rigidity · Weight · Durability · Appearance

The full-profile construction also gives performance road and gravel builds a distinctive aero-inspired look.

7075-T651 Aluminum

The chainring is CNC-machined from 7075-T651 aluminum alloy, a high-strength material commonly selected for performance bicycle components.

Key characteristics include:

• High strength-to-weight ratio
• High rigidity
• Good impact resistance
• Excellent wear resistance
• Low weight
• Long-term durability

This makes it well suited to drivetrain components exposed to repeated pedaling loads and chain contact.

Precision CNC Machining

The chainring is machined from a solid aluminum plate using CNC manufacturing.

Precision machining helps control:

• Mounting dimensions
• Tooth geometry
• Chain engagement
• Surface consistency
• Structural geometry

Rear-side machining reduces excess material without simply sacrificing structural support.

Reinforced Structural Design

Rather than relying on a completely flat disc, the rear of the chainring incorporates strategically machined structural sections.

These features help distribute pedaling forces while maintaining the stiffness required for high-load riding.

The result is a chainring designed to balance low weight with reliable power transfer.

Beveled Edge Details

Machined bevels are incorporated into the structural edges for a more refined three-dimensional appearance.

This finishing detail contributes to:

• Cleaner CNC appearance
• Premium visual finish
• Reduced sharp edges
• More dimensional surface detailing

Secure Crank Interface

The direct-mount interface is precisely machined to provide a close fit between the chainring and compatible crank.

A properly matched interface helps provide:

• Accurate positioning
• Secure installation
• Stable power transfer
• Reduced unwanted movement

Always verify correct installation before riding.

Specifications

Size & Weight

Weight may vary by approximately ±5% due to production tolerances and different measurement methods.

Available Sizes

40T, 42T, 44T, 46T, 48T, 50T, 52T, 54T

Available Colors

Black, Silver

Key Features

• SRAM 8-bolt direct-mount interface
• Designed for SRAM AXS 12-speed chains
• 3mm offset
• Narrow-wide tooth profile
• Approx. 8.5mm extended tooth height
• Improved chain retention
• Full-profile closed design
• CNC-machined 7075-T651 aluminum
• High rigidity
• Lightweight machined structure
• Excellent wear resistance
• Precision crank interface
• Sizes from 40T to 54T
• Designed for road and gravel 1x builds

Compatibility Notice

Compatible With

SRAM 8-Bolt Direct Mount Cranksets

SRAM AXS 12-Speed Chains

Not Compatible With

SRAM 3-Bolt Direct Mount Cranksets

SRAM offers multiple crank and direct-mount standards. An SRAM crank is not automatically compatible simply because it is an AXS model.

Please visually confirm the mounting interface and required offset before ordering.

If you are unsure, send us a photo of your crankset before purchase.

Package Includes

PASS QUEST SRAM 8-Bolt Direct Mount Chainring ×1

Crankset, chain, power meter and other accessories shown in product photos are not included unless specifically stated.

Installation Note

Before ordering, please confirm:

• SRAM 8-bolt direct-mount interface
• 3mm offset requirement
• SRAM AXS 12-speed chain
• Required tooth count
• Frame clearance
• Chainline requirements

For larger chainrings such as 52T / 54T , please verify adequate frame and chainstay clearance before purchase.

Professional installation is recommended.

호환성 확인: 원제조업체(OEM) 부품의 모델과 배치가 복잡하기 때문에 이 제품이 호환되지 않는 경우가 있을 수 있습니다.

제품을 받으신 후 설치 전에 OEM 사양과 비교하여 호환성을 확인해 주시기 바랍니다.

토크 사양: 이 제품은 OEM 부품 매뉴얼에 명시된 토크 값에 따라 엄격히 설치하십시오. 설치 문제: OEM 사양과 차이가 있거나 설치 초기 단계에서 어려움이 발생할 경우 즉시 중단하고 반품 또는 교환을 위해 고객 서비스에 문의하십시오.

강제 설치 금지: 어떠한 경우에도 강제로 설치하지 마십시오. 책임: 이 제품(또는 그 부품)의 강제 설치 또는 무단 개조로 인한 모든 손해는 구매자의 단독 책임입니다.

모든 제품은 수령 시 보게 될 색상을 정확하게 표현하기 위해 촬영되었습니다.

조명, 각도 또는 화면 설정의 차이로 인해 약간의 색상 차이가 발생할 수 있습니다.

실제 제품을 기준으로 생각해 주시기 바랍니다. "컬러" 및 "블루" 제품의 경우 염색 과정에서 색상 분포가 고르지 않을 수 있어 각 제품이 독특합니다.