Product Description

PASS QUEST 3-Bolt Direct Mount MTB Chainring

Upgrade your MTB drivetrain with the PASS QUEST 3-Bolt Direct Mount Chainring, CNC machined from high-strength 7075-T651 aluminum alloy.

Designed for compatible SRAM-style 3-bolt direct-mount MTB cranksets, this chainring uses a 3mm offset and a narrow-wide tooth profile for improved chain retention.

Available from 28T to 38T, making it suitable for everything from climbing-focused setups to faster XC and trail builds.

Key Features

7075-T651 Aluminum Alloy
CNC machined from high-strength 7075-T651 aluminum for an excellent balance of stiffness, durability and low weight.

3-Bolt Direct Mount
Designed for compatible SRAM-style 3-bolt direct-mount cranksets for a clean and lightweight 1x drivetrain setup.

3mm Offset
3mm chainring offset for compatible MTB crank and frame configurations.

Narrow-Wide Tooth Profile
Alternating narrow and wide teeth engage the chain more securely to improve chain retention on rough terrain.

8.5mm Extended Tooth Height
The extended tooth profile reaches approximately 8.5mm, helping keep the chain engaged during aggressive riding and rough trail conditions.

Lightweight CNC Construction
Extensive CNC pocketing removes unnecessary material while maintaining rigidity around critical load-bearing areas.

Chamfered Edges
Machined chamfers reduce unnecessary material and provide a more refined, three-dimensional finish.

Optimized Crank Interface
The direct-mount interface is designed for secure engagement with compatible cranksets, helping provide stable power transfer.

Specifications

Size & Weight

Note: Weight may vary slightly due to manufacturing and measurement differences.

Compatibility

Designed for compatible 3-bolt direct-mount MTB cranksets using the corresponding SRAM-style mounting interface.

Chain Compatibility:
10-Speed / 11-Speed / 12-Speed standard bicycle chains

Offset:
3mm

Important:
This listing is for the non-AXS version shown in the product specifications. Please confirm your crank interface before ordering.

Why Narrow-Wide?

The narrow-wide tooth profile alternates between narrow and wide teeth to better match the inner and outer chain links.

This provides:

• Improved chain retention on rough terrain
• Reduced risk of chain drops
• Stable engagement during high chain movement
• Clean 1x drivetrain setup
• No front derailleur required

Round vs. Oval Chainrings

This product is the round chainring version.

A round chainring provides consistent leverage throughout the pedal stroke and is a versatile choice for MTB, XC and trail riding.

If you prefer an oval chainring, please select the corresponding oval version separately where available.

호환성 확인: 원제조업체(OEM) 부품의 모델과 배치가 복잡하기 때문에 이 제품이 호환되지 않는 경우가 있을 수 있습니다.

제품을 받으신 후 설치 전에 OEM 사양과 비교하여 호환성을 확인해 주시기 바랍니다.

토크 사양: 이 제품은 OEM 부품 매뉴얼에 명시된 토크 값에 따라 엄격히 설치하십시오. 설치 문제: OEM 사양과 차이가 있거나 설치 초기 단계에서 어려움이 발생할 경우 즉시 중단하고 반품 또는 교환을 위해 고객 서비스에 문의하십시오.

강제 설치 금지: 어떠한 경우에도 강제로 설치하지 마십시오. 책임: 이 제품(또는 그 부품)의 강제 설치 또는 무단 개조로 인한 모든 손해는 구매자의 단독 책임입니다.

모든 제품은 수령 시 보게 될 색상을 정확하게 표현하기 위해 촬영되었습니다.

조명, 각도 또는 화면 설정의 차이로 인해 약간의 색상 차이가 발생할 수 있습니다.

실제 제품을 기준으로 생각해 주시기 바랍니다. "컬러" 및 "블루" 제품의 경우 염색 과정에서 색상 분포가 고르지 않을 수 있어 각 제품이 독특합니다.