Product Description

PASS QUEST Direct Mount Narrow-Wide Chainring for Race Face / Easton

Upgrade your 1x drivetrain with the PASS QUEST Direct Mount Narrow-Wide Chainring, designed for compatible Race Face / Easton direct-mount cranksets.

Precision CNC-machined from high-strength 7075-T651 aluminum alloy, this chainring combines low weight, high rigidity and reliable chain retention. The 3mm offset design is optimized primarily for compatible gravel and road setups.

Available in 40T, 42T, 44T, 46T, 48T, 50T, 52T and 54T.

Key Features

• Compatible with selected Race Face / Easton direct-mount cranksets
• 3mm Offset
• 40T–54T options
• 7075-T651 aluminum alloy
• Full CNC-machined construction
• Narrow-wide tooth profile
• Extended 8.5mm tooth height
• Lightweight machined structure
• High rigidity for efficient power transfer
• Black / Silver options
• Compatible with standard 10 / 11 / 12-speed chains

7075-T651 CNC Construction

Each chainring is CNC-machined from high-strength 7075-T651 aluminum alloy.

The structure is extensively machined to remove unnecessary material while retaining rigidity in key load-bearing areas, providing a balance of:

Low Weight · High Rigidity · Durability · Efficient Power Transfer

8.5mm Extended Narrow-Wide Teeth

The narrow-wide tooth profile uses an extended tooth height of approximately 8.5mm.

The taller teeth provide deeper chain engagement to help improve chain retention when riding over rough surfaces or during hard acceleration.

The alternating narrow-wide profile is designed specifically for modern 1x drivetrains.

3mm Offset

This version uses a:

3mm Offset

The offset positions the chainring inward relative to the crank mounting interface.

Please check your crank, chainline and frame clearance before ordering.

Gravel / Road-Oriented Large Chainring Design

This 40T–54T range is primarily designed for compatible gravel and road applications requiring larger gearing.

Important: Large chainrings may not fit some MTB frames because the chainring can interfere with the chainstay.

Please confirm frame clearance before ordering, especially for 48T–54T sizes.

Lightweight Machined Design

Strategically machined sections reduce unnecessary material while maintaining structural support around the direct-mount interface and tooth area.

Chamfered edges provide a cleaner finish while contributing to the chainring's lightweight construction.

Specifications

Size & Weight

Actual weight may vary slightly due to production and measurement tolerances.

Compatibility

Designed for compatible:

Race Face Direct Mount Cranks
Easton Direct Mount Cranks
EAS / SPRILL compatible direct-mount crank interfaces shown in the product images

Crank spindle references shown in the product information include:

DUB 29mm / GXP 24mm

Compatibility depends on the exact crank and mounting interface. Please compare your crank with the product images before ordering.

Important Fitment Notice

This is a 3mm offset large-size chainring designed primarily for gravel and road applications.

Some conventional MTB frames may not provide sufficient chainstay clearance.

Before ordering, please confirm:

• Direct-mount interface
• Required offset
• Chainline
• Chainring size
• Chainstay clearance
• Chain compatibility

If you are unsure, please contact us with a photo and exact model of your crankset and bike.

호환성 확인: 원제조업체(OEM) 부품의 모델과 배치가 복잡하기 때문에 이 제품이 호환되지 않는 경우가 있을 수 있습니다.

제품을 받으신 후 설치 전에 OEM 사양과 비교하여 호환성을 확인해 주시기 바랍니다.

토크 사양: 이 제품은 OEM 부품 매뉴얼에 명시된 토크 값에 따라 엄격히 설치하십시오. 설치 문제: OEM 사양과 차이가 있거나 설치 초기 단계에서 어려움이 발생할 경우 즉시 중단하고 반품 또는 교환을 위해 고객 서비스에 문의하십시오.

강제 설치 금지: 어떠한 경우에도 강제로 설치하지 마십시오. 책임: 이 제품(또는 그 부품)의 강제 설치 또는 무단 개조로 인한 모든 손해는 구매자의 단독 책임입니다.

모든 제품은 수령 시 보게 될 색상을 정확하게 표현하기 위해 촬영되었습니다.

조명, 각도 또는 화면 설정의 차이로 인해 약간의 색상 차이가 발생할 수 있습니다.

실제 제품을 기준으로 생각해 주시기 바랍니다. "컬러" 및 "블루" 제품의 경우 염색 과정에서 색상 분포가 고르지 않을 수 있어 각 제품이 독특합니다.