Product Description

PASS QUEST 3-Bolt Direct Mount Narrow-Wide Chainring

Built for gravel and road bike 1x drivetrains, the PASS QUEST 3-Bolt Direct Mount Chainring combines a lightweight CNC-machined structure with a narrow-wide tooth profile for secure chain retention and efficient power transfer.

Machined from a full piece of high-strength 7075-T651 aluminum alloy, the chainring features a 3mm offset and is available from 40T to 54T, making it suitable for riders looking for larger gearing options for gravel, road and fast all-road builds.

Key Features

• 3-Bolt Direct Mount – Designed for compatible 3-bolt direct-mount cranksets.
• 3mm Offset – Optimized for compatible gravel and road bike applications.
• 7075-T651 Aluminum – High-strength aluminum alloy combining low weight, rigidity and durability.
• Full CNC Machined – Precision CNC machining provides accurate fit and consistent construction.
• Narrow-Wide Tooth Profile – Alternating tooth profile improves chain engagement and retention on 1x drivetrains.
• 8.5mm Extended Tooth Height – Deeper chain engagement helps reduce the risk of chain drops.
• Lightweight Machined Structure – Material is strategically removed to reduce weight while maintaining structural rigidity.
• Chamfered Edges – CNC-machined chamfers provide a refined appearance and smooth finishing.
• 40T–54T Options – Large chainring sizes for gravel, all-road and road-oriented gearing.

Specifications

Size & Weight

Weights are approximate and may vary slightly due to manufacturing and measurement differences.

3mm Offset Design

This version uses a 3mm offset and is designed primarily for compatible gravel and road bike setups.

The offset affects chainline and frame clearance, so please verify your crankset and frame specifications before ordering.

Important: This model may not provide sufficient clearance on some conventional MTB frames and could interfere with the chainstay.

Narrow-Wide Chain Retention

The extended narrow-wide tooth profile is designed to engage the inner and outer chain links more securely.

With an approximate 8.5mm tooth height, the deeper engagement helps keep the chain seated during vibration, rough roads and aggressive riding.

This makes it particularly suitable for clean and lightweight 1x drivetrain setups.

CNC 7075-T651 Construction

The chainring is CNC-machined from high-strength 7075-T651 aluminum alloy.

Strategically machined sections reduce unnecessary material while the structural layout is designed to maintain rigidity under pedaling loads.

Chamfered edges around the machined sections provide a cleaner, more dimensional finish.

Compatibility Notice

Please confirm all of the following before ordering:

3-Bolt Direct Mount Interface
3mm Offset / Required Chainline
Chainstay Clearance
Required Tooth Count

This chainring is designed primarily for compatible gravel and road applications. Due to the larger 40T–54T sizes and 3mm offset, compatibility with conventional mountain bike frames is not guaranteed.

If you are unsure, please contact us with your crankset model and bike/frame model before ordering.

호환성 확인: 원제조업체(OEM) 부품의 모델과 배치가 복잡하기 때문에 이 제품이 호환되지 않는 경우가 있을 수 있습니다.

제품을 받으신 후 설치 전에 OEM 사양과 비교하여 호환성을 확인해 주시기 바랍니다.

토크 사양: 이 제품은 OEM 부품 매뉴얼에 명시된 토크 값에 따라 엄격히 설치하십시오. 설치 문제: OEM 사양과 차이가 있거나 설치 초기 단계에서 어려움이 발생할 경우 즉시 중단하고 반품 또는 교환을 위해 고객 서비스에 문의하십시오.

강제 설치 금지: 어떠한 경우에도 강제로 설치하지 마십시오. 책임: 이 제품(또는 그 부품)의 강제 설치 또는 무단 개조로 인한 모든 손해는 구매자의 단독 책임입니다.

모든 제품은 수령 시 보게 될 색상을 정확하게 표현하기 위해 촬영되었습니다.

조명, 각도 또는 화면 설정의 차이로 인해 약간의 색상 차이가 발생할 수 있습니다.

실제 제품을 기준으로 생각해 주시기 바랍니다. "컬러" 및 "블루" 제품의 경우 염색 과정에서 색상 분포가 고르지 않을 수 있어 각 제품이 독특합니다.