NIUJU Saddle GoPro & Rear Light Mount for Selle Italia SLR Boost Superflow | 3D Printed Nylon

Designed specifically for Selle Italia SLR Boost Superflow

Designed specifically for the Selle Italia SLR Boost Superflow saddle, the NIUJU NG86 provides a clean and discreet mounting point beneath the rear of the saddle.

The main mount features a GoPro-style interface, allowing you to install a compatible action camera or combine it with one of our optional rear-light adapters. It keeps accessories centered behind the saddle for a clean, integrated-looking setup without adding unnecessary bulk.

Key Features

• Designed for Selle Italia SLR Boost Superflow saddles
• Integrated GoPro-style mounting interface
• Compatible with multiple optional rear-light adapters
• Lightweight 3D-printed nylon construction
• Main NG86 mount weighs approximately 12g
• Compact dimensions: approximately 41 × 20 × 27mm
• Mounts discreetly underneath the rear of the saddle
• Ideal for road bike use

Modular GoPro & Rear Light Mounting

The NG86 uses a GoPro-style interface as the base connection. It can be used on its own with compatible accessories or paired with a dedicated rear-light adapter.

Different rear lights use different mounting systems, so please select the adapter that matches your exact rear-light model. Rear-light adapters are not universal.

Available Rear Light Adapters

Depending on the option selected, compatible adapters are available for rear lights from brands including:

• Magene
• Garmin
• ROCKBROS
• iGPSPORT
• Magicshine
• Trek / Bontrager
• Xlite
• Cateye
• Specialized
• REALWISE
• Bryton
• and selected compatible models

Please check the adapter model and compatibility information carefully before ordering. Similar-looking rear lights may use different mounting interfaces.

NG86 Specifications

Installation

Remove the mounting screw and gently open the rear section of the NG86 bracket. Position the mount at the rear of the compatible saddle and then reinstall and tighten the screw.

Because the main body is made from 3D-printed nylon, do not excessively spread or bend the bracket during installation.

Important Load Limit

The recommended maximum accessory weight is 80g. For heavier accessories, we recommend using an additional safety tether.

For road cycling use only. Avoid excessive vibration, impacts, or use with accessories exceeding the recommended weight limit.

Important Compatibility Notice

This mount is designed specifically for compatible Selle Italia SLR Boost Superflow saddles. Please compare your saddle with the product photos before ordering.

If you are adding a rear light, select the correct adapter for your specific light model. Rear-light mounting standards vary between brands and models, and adapters should not be selected based only on visual similarity.

Please Note

Product photos are for reference only. Actual products may vary slightly due to production updates. Unless otherwise stated, bicycles, saddles, rear lights, cameras and other accessories shown in the photos are not included.

Minor surface texture is normal for 3D-printed nylon components and does not indicate a defect.

Verificación de compatibilidad: debido a la complejidad de los modelos y lotes de piezas del fabricante de equipos originales (OEM), puede haber casos en los que este producto sea incompatible.

Al recibir este producto, compárelo con las especificaciones OEM para garantizar la compatibilidad antes de la instalación.

Especificaciones de torque: Instale este producto estrictamente de acuerdo con los valores de torque especificados en el manual de piezas OEM. Problemas de instalación: Si encuentra alguna discrepancia con las especificaciones OEM o enfrenta dificultades en la etapa inicial de instalación, deténgase inmediatamente y comuníquese con el servicio al cliente para obtener ayuda con devoluciones o cambios.

Sin instalación forzada: No fuerce la instalación bajo ninguna circunstancia. Responsabilidad: Cualquier daño resultante de una instalación forzada o modificaciones no autorizadas de este producto (o sus componentes) será responsabilidad exclusiva del comprador.

Todos los productos están fotografiados para representar con precisión los colores que verá al recibirlos.

Debido a diferencias de iluminación, ángulos o configuraciones de pantalla, pueden ocurrir ligeras variaciones de color.

El producto real debe considerarse el estándar. Para los productos "coloreados" y "azules", el proceso de coloración puede generar una distribución desigual del color, lo que hace que cada producto sea único.