NIUJU Computer Mount for Cinelli RAM 3 | Garmin Wahoo GoPro Mount

Computer Mount for Cinelli RAM 3 Integrated Cockpit

A clean and secure out-front computer mount designed for the Cinelli RAM 3 integrated cockpit and compatible Passoni cockpit applications.

The NIUJU N028 mount positions your cycling computer neatly in front of the handlebar for a clean, integrated appearance while keeping the display easy to read during your ride.

With a main body length of approximately 94 mm, the mount is long enough to accommodate larger cycling computers such as the Garmin Edge 1050. A lower accessory interface is also included for mounting a compatible front light or action camera.

Key Features

• Designed for the Cinelli RAM 3 integrated handlebar/cockpit
• Also suitable for compatible Passoni integrated cockpit applications
• Approximately 94 mm main body length
• Supports larger cycling computers including Garmin Edge 1050
• Interchangeable computer inserts for multiple cycling computer brands
• Integrated lower GoPro-style accessory mount
• Can be used with compatible front lights or action cameras
• Aluminum alloy main body
• Approximate complete weight: 33 g including hardware
• Anodized aluminum finish
• Clean out-front position for an integrated cockpit appearance

Compatible Cycling Computers

Garmin

Compatible with Garmin Edge 25 / 130 / 530 / 540 / 830 / 840 / 1000 / Explore 2 / 1030 / 1040 / 1050 and other models using the compatible Garmin interface.

Wahoo

Compatible with Wahoo ELEMNT / ROAM / ROAM V2 / BOLT / BOLT V2 / MINI.

Wahoo ACE may use a compatible interface, but due to the larger size of the computer, fitment may depend on available mount length and cockpit clearance.

iGPSPORT

Compatible with iGPSPORT iGS800 / 630 / 620 / 520 / 320 / 130 / BSC300 / 200 / 100 and compatible models.

Bryton

Compatible with Bryton Rider 860 / S800 / 750 / 530 / S500 / 460 / 450 / 420 / 410 / 330 / 320 / 310 and compatible models.

GIANT

Compatible with selected GIANT cycling computers including G3 / P3 / G9 when the appropriate insert is selected.

Other Computer Interfaces

Additional inserts are available for selected Magene, XOSS, Shanren, Cycplus, ROCKBROS and other cycling computers.

Older GIANT NEOS TRACK / GPS / SYNC interfaces, selected CATEYE computers and SRM PC7 / PC8 may require their corresponding dedicated interface.

Please select the correct computer interface when ordering. Cycling computer mounting standards can vary between brands and generations.

Integrated GoPro-Style Accessory Mount

A lower GoPro-style accessory interface is included, allowing the computer and a compatible front light or action camera to be mounted together for a cleaner cockpit setup.

Many bicycle lights require a separate GoPro-style adapter. Adapter requirements vary depending on the light manufacturer and model.

Action cameras may also require their original or compatible adapter depending on the camera.

Product Specifications

Designed for a Clean Integrated Cockpit

The mount follows the shape and mounting position of the RAM 3 cockpit to keep the cycling computer centered and positioned naturally in front of the handlebar.

The 94 mm extended design provides additional clearance for larger computers while maintaining a compact appearance.

The lower accessory mount also makes it possible to combine your computer and front light into a single cockpit setup instead of using separate handlebar clamps.

Installation Notes

Installation requires gently opening the rear section of the mount before positioning it onto the compatible cockpit and tightening it securely.

To protect the cockpit finish, we recommend applying a thin layer of protective tape or clear frame-protection film between the contact surfaces before installation.

Do not force the mount excessively during installation.

Important Compatibility Information

Please confirm that your cockpit is the Cinelli RAM 3 or uses the same compatible mounting structure before ordering.

Computer interfaces can vary between brands and model generations. Please select the insert corresponding to your cycling computer when placing your order.

For larger computers or when installing a heavy front light underneath the mount, avoid severe impacts and rough road conditions whenever possible. We also recommend using a safety tether for additional security.

If you are unsure about compatibility, please send us a photo of your cockpit and tell us your cycling computer model before ordering.

Verificación de compatibilidad: debido a la complejidad de los modelos y lotes de piezas del fabricante de equipos originales (OEM), puede haber casos en los que este producto sea incompatible.

Al recibir este producto, compárelo con las especificaciones OEM para garantizar la compatibilidad antes de la instalación.

Especificaciones de torque: Instale este producto estrictamente de acuerdo con los valores de torque especificados en el manual de piezas OEM. Problemas de instalación: Si encuentra alguna discrepancia con las especificaciones OEM o enfrenta dificultades en la etapa inicial de instalación, deténgase inmediatamente y comuníquese con el servicio al cliente para obtener ayuda con devoluciones o cambios.

Sin instalación forzada: No fuerce la instalación bajo ninguna circunstancia. Responsabilidad: Cualquier daño resultante de una instalación forzada o modificaciones no autorizadas de este producto (o sus componentes) será responsabilidad exclusiva del comprador.

Todos los productos están fotografiados para representar con precisión los colores que verá al recibirlos.

Debido a diferencias de iluminación, ángulos o configuraciones de pantalla, pueden ocurrir ligeras variaciones de color.

El producto real debe considerarse el estándar. Para los productos "coloreados" y "azules", el proceso de coloración puede generar una distribución desigual del color, lo que hace que cada producto sea único.